Click To Call(689) 329-1279Click To Get A Free Estimate
Clean paver driveway after washing and fresh joint sand in front of a Kissimmee home

Wash away the green and refill every joint

Paver Cleaning and Joint Sand in Kissimmee, FL

Call (689) 329-1279 for a free estimate to clean and re-sand pavers at your Kissimmee home.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 329-1279

Can I get my pavers cleaned in Kissimmee without a long wait?

A local contractor cleans pavers across Kissimmee, FL, and you will hear back within 1 business day, usually much sooner. Fresh joint sand is part of the job, and the free estimate carries no pressure to book. To start, call (689) 329-1279.

Cleaning lifts the algae, rust marks and ground-in dirt that dull pavers, so the surface looks brighter and grips better underfoot. Fresh sand then goes into the joints, locking the pavers together and crowding out weeds. The back walk that went green after a wet summer can match the rest of the yard again. Point out the worst spots when you ask for your free estimate.

Call (689) 329-1279

Paver walkway with one weathered section beside a clean section with fresh joint sand

What is part of a paver cleaning job in Kissimmee?

Expect a treatment for what is growing or staining the pavers, a controlled wash and new joint sand once the surface dries. Book it on its own, or as the opening half of a sealing job. Shaded edges and spots near the sprinkler heads usually take the longest. To line up a cleaning, call (689) 329-1279.

Treatment first

A cleaner matched to the problem, whether algae, rust or oil, goes on before any wash and is tried on a small spot.

Controlled wash

A rotary surface cleaner covers the area evenly at low pressure, so the sand stays in the joints.

Fresh joint sand

Dry sand is swept into every gap once the pavers dry, then wet down to settle it.

Sealer if you want it

Sealer is an add-on once the pavers have dried fully. The sealing guide covers what that adds.

What are the signs my pavers need cleaning?

Look for a green or black film on shady edges, orange streaks near the sprinklers, weeds pushing up in the joints and sand piled on the driveway after a downpour. Algae comes first on that list, since a slick walk or pool deck is a slipping risk. To have yours looked at, call (689) 329-1279.

Is cleaning enough, or should I seal my pavers too?

A cleaning handles how the pavers look now, and sealer decides how long they keep that look. Cleaning alone costs less now, but algae and fading return on their own schedule. A coat makes the next wash faster, and it is a repeat job every few years. Tell the contractor if you want the coat too, when you ask for your free estimate.

How often should Kissimmee pavers be cleaned?

Once a year suits most homes, and an Orlando paver company suggests a maintenance wash every 12 to 15 months. With rain on about 119 days a year here, a shaded walk or a patio under the roofline may need it sooner than a sunny driveway. To set a schedule, call (689) 329-1279.

Does a harder blast clean pavers better?

No. Western Interlock, a paver maker, says to keep the pressure under 1,500 PSI and the nozzle at least six inches away, and it favors a surface cleaner, which spins two heads an inch or less above the paver. A harder blast empties the joints and can scar a softer face. Ask which pressure the contractor will use when you ask for your free estimate.

Western Interlock also says to sweep in new joint sand after any wash, because pressure lifts it out. The sand locks the pavers together, so losing it matters as much as losing the dirt. To ask how a contractor handles it, call (689) 329-1279.

Rust marks

Why do orange marks keep showing up near my Kissimmee sprinklers?

The usual cause is iron in the water. UF/IFAS notes that iron is common in Florida well water and shows up as rust on whatever the sprinklers hit. A rust remover made for pavers lifts the marks, and they have to come off before any sealer goes on. Point them out when you call (689) 329-1279.

What is the white haze on my pavers?

On newer pavers it is usually efflorescence, natural salts working up to the surface. Unilock says it fades on its own, typically in two to three months and sometimes in up to a year, and sealing should wait until it is gone. A coat of old sealer that has turned cloudy can look much the same. Show the contractor the spot when you ask for your free estimate.

Surfaces

Which paved areas can be cleaned at a Kissimmee home?

Every paved area at the house can be cleaned, from the driveway and pool deck to the patio and the front walk. Each one collects a different kind of dirt, so the treatment changes. To start with yours, ask for your free estimate.

Driveways

Tires, oil drips and hours of direct sun hit the driveway before anything else. Cleaning here pays off most where cars turn in and the joints loosen first.

Pool decks and lanais

A pool deck sees splash water, chlorine and wet bare feet all day, and a screened cage keeps rain and leaves in the corners. Cleaning near a pool should leave a surface that still grips under wet feet.

Patios

A patio under a roofline or a live oak stays damp for most of the day. Cleaning there is mostly about clearing the green film from the shady edges.

Walkways and entries

Mulch, potting soil and planter drips collect along a front walk. Cleaning on the entry is a small job that guests notice first.

Common problems

What leaves Kissimmee pavers dirty?

Rain-washed joints, algae, well water rust, sun fading and old sealer lead the list. Cleaning handles several of these, and sealing or repairs cover the rest. To see which ones apply to your home, call (689) 329-1279.

1. Sand lost to summer rain

Kissimmee gets about 8.4 inches of rain in August alone, on nearly 18 days of the month, according to NOAA figures on Wikipedia. Hard downpours wash sand out of the joints, and once the seams run low the pavers shift and weeds root.

2. Green film in shade and beside the cage

Rain falls on about 119 days a year here. Corners that stay damp, like a north walk or the edge of a pool cage, grow algae that turns slick.

3. Orange marks from well water

UF/IFAS says most Florida well water is high in iron, and sprinklers that spray it leave orange streaks. A rust treatment has to come before any sealer, because the coat would lock the stain in.

4. Color baked out of open driveways

The average July high in Kissimmee is 91.5 degrees. A wash shows how much color remains, and sealer afterward slows the fading.

5. Old sealer gone cloudy or peeling

An Orlando paver company says a coat that has turned white, cloudy or started peeling has to be stripped before new sealer can bond. It is the step that most often changes a quote.

Pricing

What does paver cleaning cost in Kissimmee?

A plain pressure wash runs $0.15 to $0.75 per square foot, according to an Orlando paver company. That puts a 600 square foot driveway between $90 and $450, and a 1,000 square foot pool deck between $150 and $750. Joint sand is a separate line, and a rust or algae treatment can add to the price. For a number on your property, ask for your free estimate.

Planning to seal as well? Ask for one combined price. The Central Florida range for the whole job is $1.50 to $3.00 per square foot. To compare the two, call (689) 329-1279.

Want the pavers protected too? The sealing guide covers it, and every town on the list has its own page.

Paved areaPressure wash onlyClean, sand and seal
300 sq ft$45 to $225$450 to $900
600 sq ft$90 to $450$900 to $1,800
1,000 sq ft$150 to $750$1,500 to $3,000

The wash column multiplies the $0.15 to $0.75 per square foot that an Orlando paver company lists for a standard pressure wash. The sealing column applies the $1.50 to $3.00 range that Central Florida companies published, as read in November 2026. Joint sand is priced apart from a wash, and your own quote may differ.

Get a Free Estimate

Screened pool deck with pavers ready for cleaning at a Kissimmee home
Why choose us

Why use a local contractor for paver cleaning in Kissimmee?

A contractor who works around Kissimmee knows what lake humidity, well water and summer storms leave behind on pavers. You can hold the quote up to the published rates on this page and decide in your own time. To begin, ask for your free estimate.

Contractors who know Osceola County weather

A company that covers Kissimmee already plans around afternoon downpours, lake humidity and sprinklers that run every morning. That makes the first visit more useful.

Free to ask

The visit and the estimate cost nothing. If the price does not suit you, say no and owe nothing.

Ranges you can check

Central Florida paver companies publish what they charge per square foot, and this site shows the same range. If a quote lands well outside that range, ask the contractor why.

You set the pace

Get the price on paper and take the time you need. The contractor standards page lists what to confirm before you sign anything.

Want a free estimate to clean your Kissimmee pavers?

Use the short form or phone in, and the answer arrives within 1 business day, usually much sooner.

Call (689) 329-1279

Free, no obligation

Contractor going over a cleaning plan with a homeowner beside a paver driveway
Photos

What do cleaned pavers look like around Kissimmee?

Wide sealed warm gray paver driveway with a curved border course at a stucco home on a Kissimmee property
Sealed travertine-look pool deck inside a screened lanai with a spa spillover on a Kissimmee property
Sealed herringbone paver patio with an outdoor kitchen and fire table on a Kissimmee property
Sealed terracotta paver walkway with a charcoal border leading to an arched front door on a Kissimmee property
Close view of sealed travertine pavers with clean joints on a Kissimmee property
Paver driveway with one cleaned half beside a stained half on a Kissimmee property
Contractor running a surface cleaner over a brick paver driveway on a Kissimmee property
Two contractors working a sprayer and roller on a paver driveway on a Kissimmee property
How it works

How does the paver cleaning process go, step by step?

Choosing no sealer ends the visit after the fourth step, with the joints full. To set a date, call (689) 329-1279.

1. Measure and inspect

The contractor measures the area for the cleaning quote and marks sunken pavers, bare joints, old sealer and any spot where water stands.

2. Cover and protect

Pool cage screens, plants and the garage door are covered, and the sprinklers are switched off. Sealer overspray does not wash off, so a metal sheet goes along the edges.

3. Treat and wash

An algae treatment and, where needed, a rust remover go on first. A rotary surface cleaner then washes the pavers at under 1,500 PSI, which keeps the sand in the joints.

4. Sand the joints

When the pavers are dry, joint sand is swept in, wet down to settle it and topped off, and the extra is blown clear.

5. Seal and walk the job

A pump sprayer lays the sealer down and a dry roller soaks up the puddles. The contractor then walks you through how long to stay off the surface.

Questions

Frequently Asked Questions

What water pressure should a contractor use on my Kissimmee patio pavers?

A light hand. Western Interlock, a paver maker, says to keep the pressure under 1,500 PSI and the nozzle at least six inches from the surface. More force pulls sand out of the joints, so fresh sand goes in after the wash. Ask your contractor what pressure they use.

Is it a good idea to pressure wash pavers?

It is when the pressure stays low and the joints get refilled. Western Interlock points to a surface cleaner, a round attachment with two spinning heads an inch or less above the paver, as the safer tool for large areas. A bare wand blast risks scarring the face and emptying the seams.

Do I need a license to pressure wash in Florida?

Not a state contractor license. Florida Statutes section 489.117 lists pressure washing among the job scopes where a local government may not require a license. The business still needs an Osceola County Local Business Tax Receipt, and you can ask for proof of insurance. If the job reaches past cleaning into repairs, ask which rules apply.

How much does it cost to clean and seal block paving?

Block paving is another name for pavers. Central Florida companies publish $1.50 to $3.00 per square foot for the full clean, sand and seal, so a 300 square foot patio lands near $450 to $900. One company's $1,000 minimum can lift the price of a small job.

How much to clean and seal pavers?

A 600 square foot driveway comes to about $900 to $1,800 at the Central Florida range. An Orlando paver company lists a plain pressure wash at $0.15 to $0.75 per square foot, so a wash alone costs far less than the full job. Joint sand and stripping are priced apart.

What should a contractor leave out when cleaning Kissimmee pavers?

The wire brush. Unilock says a wire brush scratches the surface and leaves metal particles that show up later as rust. A full-power blast is out too, since it knocks out the joint sand. A contractor uses a surface cleaner and a treatment matched to each stain.

Why do my pavers keep turning green in Kissimmee?

Rain falls on about 119 days a year here, according to NOAA figures on Wikipedia, and shaded corners stay wet between storms. Algae needs only that dampness. Trimming back plants and aiming sprinklers away from the pavers help, and a sealed surface rinses clean faster.

Will a cleaning remove the orange sprinkler marks at my Kissimmee home?

Plain washing rarely does. UF/IFAS points out that iron is common in Florida well water and that rust deposits form wherever it is sprayed, so the marks need a rust remover made for pavers. More pressure only pushes the stain in deeper. Point the marks out when you ask for a price.

Pick a day to freshen your Kissimmee pavers

Fill out the short form or ring the number, and a local company answers within 1 business day, usually much sooner.

Call (689) 329-1279

Free, no obligation